While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
• M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
• T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. T4 is the better/higher of the two ratings.
Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for best use.
In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This is synonymous for T ratings. This should provide the hearing aid user with “normal usage” while using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a signal quality that is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard.
To ensure that the Hearing Aid Compatibility rating for your phone is maintained, secondary transmitters such as Bluetooth and WLAN components must be disabled during a call.
GSM & WCDMA GSM & WCDMA 850, 1900
P8000 (Crossover) GSM & WCDMA 850,1900 M3, T3
|Models||FCC ID||Air Interface(s)||Band||
|ADR930L (Perception)||JYCPREMIAV||CDMA & LTE||CDMA 800, 1900 LTE 750||M4, T3|
|P9090(Discover)||JYCP9090||GSM & WCDMA LTE||GSM & WCDMA 850, 1900 LTE 700, 850, 1700, 1900||M3, T4|
|P8010(Flex)||JYCP8010||GSM & WCDMA LTE||GSM & WCDMA 850, 1900 LTE 700, 1700||M3, T3|
|ADR910L(Marauder)||JYCSTARQ||CDMA & LTE||CDMA 800, 1900 LTE 750||M4, T3|
|P6030(Renue)||JYCP6030||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T4|
|P6020(Swift)||JYCP6020||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T3|
|P9070(Burst)||JYCP9070||GSM & WCDMA LTE||GSM & WCDMA 850, 1900 LTE 700, 1700||M3, T4|
|P8000(Crossover)||JYCP8000||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T4|
|P2020(Ease)||JYCP2020||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T4|
|P9020(Pursuit)||JYCP9020||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T3|
|P2000(Breeze II)||JYCP2000||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T4|
|P7040(Link)||JYCP7040||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T3|
|P7000(Impact)||JYCP7000||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T3|
|C790(Reveal)||JYCC790||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T3|
|C520(Breeze)||JYCC520||GSM||GSM 850, 1900||M3, T3|
|C530(Slate)||JYCC530||GSM||GSM 850, 1900||M3, T3|
|TXT8035 (Caper)||JYCTOW||CDMA||CDMA 800, 1900||M4|
|C610||JYCC610||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T3|
|TXT8040(Jest)||JYCSHOW||CDMA||CDMA 800, 1900||M4, T3|
|CDM8635||PP4COACH||CDMA||CDMA 800, 1900||M4, T4|
CDMA 800, 1900
GSM 850, 900, 1800, 1900
|TXT8030VW||PP4PIVOT||CDMA||CDMA 800, 1900||M4, T4|
|CDM8975PTT||PP4RAP||CDMA||CDMA 800, 1900||M4|
|CDM8950VW||PP4ECHO||CDMA||CDMA 800, 1900||M4, T4|
|TXT8026C/TXT8026PK||PP4ELVISPLUS||CDMA||CDMA 800, 1700, 1900||M4|
|TXT8010VW/TXT8010OM||PP4ELVIS||CDMA||CDMA 800, 1900||M3|
|CDM8964OM||PP4IMD||CDMA||CDMA 800, 1900||M3|
|Ocean||PP4PN-810||CDMA||CDMA 800, 1900||M4, T4|
|Ocean2||PP4OZ2||CDMA||CDMA 800, 1900||M4, T4|
|CDM8955E||PP4PN-E330||CDMA||CDMA 800, 1900||M4|
|CDM8960CE||PP4OVAL||CDMA||CDMA 800, 1900||M4|
|CDM8630VW/CDM8630AL||PP4EZ2||CDMA||CDMA 800, 1900||M4, T4|
|PP4L1||CDMA||CDMA 800, 1900||M4|
|P6010(Pursuit II)||JYCP6010||GCM & WCDMA||GSM & WCDMA 850, 1900||M3, T3|
|P2030(Breeze III)||JYCP2030||GCM & WCDMA||GSM & WCDMA 850, 1900||M4, T4|
|CDM8992(Hotshot)||JYCBLADE||CDMA||CDMA 800, 1900||M4, T4|
|P5000(Link II)||JYCP5000||GSM & WCDMA||GSM & WCDMA 850, 1900||M3, T3|
|TXT8045(Jest 2)||JYCBUDDY||CDMA, GSM||
CDMA 800, 1900
GSM 850, 900, 1800, 1900
|ADR8995(Breakout)||JYCAPACHE||CDMA & LTE||
CDMA 800, 1900
|P9060(Pocket)||JYCP9060||GSM & WCDMA||GSM & WCDMA 850, 1900||M4, T3|